CARE AND CLEANING - COMMERCIAL GRADE WALLPAPERS
Care and Cleaning of Type II Commercial Grade Wallpapers
Ordinary dirt and smudges can be removed with a mild soap and warm water. Clean from bottom of wall upward. Rinse thoroughly with clean water from the top down using a sponge. Deeply embossed wallcoverings need extra attention to remove suds or loosened dirt that may lodge in the embossing. Dry wallcovering with a soft lint free cloth or towel.
For more difficult stains that are only surface deep, the use of a stronger detergent is recommended. Always test an inconspicuous area with the stronger detergent to be sure that the surface and ink are not damaged.
Do not use steel wool or powdered abrasives because they can damage the image and textured surface. Do not use solvents, alcohol, pine oil, or cleaners that contain these kinds of products as they can remove the image and damage the textured surface.
When cleaning, always take measures to prevent water from dripping behind molding.
Never mix cleaning agents together, violent reactions may occur.
Surface Protection of Type II Commercial Grade Wallpapers
Always protect new installations with a high quality topcoat to minimize damage by dirt, scratches and abrasion. This is especially important in high traffic areas where people and objects will have frequent contact with the surface.
Dreamscape Dreamguard Protex3 is a non-hazardous, water-based protective topcoat that is designed specifically to protect your valuable custom wallcovering from scratches, abrasions, smudges and many types of food stains. Dreamguard can be applied with commercial liquid laminating equipment as well as on site with a paint roller.